MICRO SERGEANT
Modle: MK-02
A new generation micro sergeant is patented ekectronic goods , it is the outcome of the modern high ¨Ctech, compact , simple and easy to use , nimble , multifunctoin , puality rellable , worthy of your trust . if you need anti-theft device , don't forget electronic micro sergeant.
Host capacity: 11x 8 x 2.3 cm
Thank you for use this products. Please read through this manual before using this product so as to operate the product properly.
The latest products developed by our company, Patented electronic goods. As a result of use in great scope, Practical, people needs more. New concept electronic micro sergeant is very useful, it really realizes wireless alarm control and remote managements and solves the limitation of wired data transmission in telephone and wired network. so you feel like that you have an able helper¡£
Its main function is theftproof and monitor.
INTRODUCTION AND FEATURE
A new generation micro sergeant is the outcome of the modern high-tech,compact,simple and easy to use ,nimble,multifunction,quality reliable,worthy of your trust. you can tapped at any time and any where ,On the monitoring function£¬Anti-theft feature, no time limitation and distance constraints , can monitor site conditions within 3~5. Before call you£¬this apparatus sound the alarm and conduct electronic diagnostic Site conditions As much as possible To avoid false .At the same time All functions can be used ,can also be used for each function individually£¬it meets the needs of people who need monitor and to guard against burglary .
when the disconnect the power supply, Can continue to work 40 hours.
If some one touch your motorcycl or car , beginning , this apparatus sound the alarm , if continue to touch it then call you .
If the thief enter your house , or the house is on fire , or the gas leak ,this apparatus call you .
Use In The Place Where House-shaped
(houses, shops, safety cabinets, storage etc)
1. The unit included Part
host£¬infrared detector£¬speaker£¬ remote control
2.Layout and Connections
After the host to connect the power supply, Speaker connection to the host£¬then Placed in the place where you think appropriate.the infrared detectors to be placed in the corner higher places£¬its monitoring range 4~10meters .The distance between the host and infrared detectors is <150m(in the city of intensive skyscrapers<50m£¬in the towns<150m).
The distance between the host and remote controller is
<50m
(in the city of Intensive skyscrapers<20m£¬in the towns<50m)
The remote controller to carry.
3.Usage
Insert a valid SIM into the host, turn on the power switch, if the power lamp light off, have to Charging 20 minutes£¬then turn off the power swich ,after the 10 seconds turn on the power switch again ,after the status lamp light on,in one minute you use your phone call the SIM card that in the host.(if the one minute past the status lamp is flicker-flicker,this time you have to Operation from scratch ) £¬after Connect ,you could hang up the phone, wait for the host call you back. after the call, you can reject it,this time your phone number already save in the host.
now ready,you Lock the door after Press the following key ,you can hear the a voices of speakers ( and the status lamp light off) this indicated that apparatus into the working state.
then ,if the thief enter your house ( or the hose is on fire, the gas leak )this apparatus call you and you can Use the monitor function , monitor site conditions.
4.Note
Connect the power supply is its best state, disconnect the power,not
sound the alarm,apparatus Can continue to work 40 hours. infrared detectors
battery Can be used 24x2month,if batteries run out Should be replaced.
Use In Small Car, Motorcycle Etc Small Transport
1)The unit included Part
host£¬speaker£¬ remote control
2) Layout and Connections
After the host to connect the small transports 12v power supply, Speaker connection to the host£¬then Placed in the place where you think appropriate. remote controller to carry.The distance between the host and remote controller is <50m(in the city of Intensive skyscrapers<20m£¬in the towns<50m)
3) Usage
Insert a valid SIM into the host, turn on the power switch, if the power lamps light off, have to Charging 20 minutes£¬then turn off the power swich ,after the 10 seconds turn on the power switch again ,after the status lamps light on,in one minute you use your phone call the SIM card that in the host.(if the one minute past the status lamp is flicker-flicker,this time you have to Operation from scratch ) £¬after Connect ,you could hang up the phone, wait for the host call you back. after the call, you can reject it,this time your phone number already save in the host. now ready, Press the follow key ,you can hear the a voices of speakers and the status lamps light off this indicated that apparatus into the working state.
then , if some one touch your Small transport
,beginning ,this apparatus sound the alarm,if continue to touch it, then this apparatus call you and any time you can use the monitor function ,monitor the voice of around .
4)Note
Must installation Stable£¬fixed£¬if not will impact of its normal functioning, must be avoided intothe water
Use In Large Cargo Vehicles
1)The unit included Part
host£¬ speaker, wireless vibration transmitter£¬ remote control£¬
2) Layout and Connections
This is same with the << Use In Small Car, Motorcycle Etc Small transport>>s Layout and Connections section£¬The difference is , as a result of it have large shape£¬ you can add match wireless vibration transmitter,vibration transmitter to connect the 12v power supply
3) Usage
You can refer to << Use In Small Car, Motorcycle Etc Small transport>>s usage section.
4)Note:If the voltage is higher than 12v£¬must use the pressure reducer
Monitor
1)The unit included Part
host
2) Layout and Connections
the host to connect the power supply, then Placed in the place where you think appropriate.
3) Usage
insert a valid SIM into the host, turn on the power switch, if the power lamps light off, have to Charging 20 minutes£¬then turn off the power swich ,after the 10 seconds turn on the power switch again ,after the status lamps light on,in
one minute you use your phone call the SIM card that in the host.(if the one minute past the status lamp is flicker-flicker,this time you have to Operation from scratch ) £¬after Connect ,you could hang up the phone, wait for the host call you back. after the call, you can reject it,this time your phone number already save in the host. monitor the voice of around ,range is 3~5m
4)Note:
Card number never not let other people know,if not they also can use monitoring function
